Table of Contents
Advertisement
Function
Code
Hex
Remarks
Print NV bit image
<ESC> <FS> "p" n m
1B 1C 70 n m
1) Prints NV bit image n using the m mode.
m
0, 48
Normal Mode
1, 49
Horizontal Magnification
2, 50
Vertical Magnification
3, 51
4 X Magnification
2) n specifies the NV bit image number.
3) m specifies the bit image mode.
Precautions:
1) NV Bit Image is defined by Define NV Bit Image (ESC FS
q) to the non-volatile demiconductor memory and indi-
cates the bit image that can be printed using this com-
mand.
2) This command is invalid if the specified NV bit image n
is not defined.
3) This is valid only when data exists in the print buffer.
4) Excluding upside down printed characters, this has no
effect on the printing modes (bold, layered printing,
underlines, character size, character black and white
inversion).
5) When the size of a bit image that exceeds the printable
area is selected, the data within the printable area can be
printed, but data exceeding that range will not be printed.
6) Paper feeds will occur for the number of dots when in the
Normal Mode and in the Horizontal Magnification Mode
(NV bit image n height) and in the number of dots for
Vertical Magnification Mode and 4 X Magnification (NV
bit image n height x 2).
7) When printing this bit image is completed, the head of
the line is considered the position for the next print and
normal data processing will occur.
Mode
– 42 –
Vert.
Hor.
Dot
Dot
Density
Density
180 DPI 180 DPI
180 DPI 90 DPI
90 DPI
180 DPI
90 DPI
90 DPI
Advertisement
Table of Contents
