Table of Contents
Advertisement
Function
Code
Hex
Remarks
Set right margin
<ESC> "Q" n
1B 51 n
Sets the right margin as a non-printing area using the
current character pitch up to digit n based on the right
edge.
1. Character pitches include spaces between characters,
and magnified character settings are valid. The right
margin position is the last position of the digit n .
2. Settings for printing areas beyond the right edge are
ignored.
3. Settings for printing one line width up to 36 mm (288
dots) are ignored.
4. Changes of the settings partway through a line are
valid from the next line.
5. Margin positions do not change even if the character
pitches are changed after making the settings.
6. The left edge is the left margin when turning the power
ON.
7. Printing data which exceeds the limits of the right
margin are printed on the subsequent line after a line
feed for printing.
8. Bit dot image data which exceeds the right margin is
discarded.
– 26 –
Advertisement
Table of Contents
