Function
Code
Hex
Remarks
1. This code is processed in real-time upon its reception
from the host. (direct decode.)
However, this is not processed when in ESC se-
quence.
2. The following are causes of mechanical errors.
a. Head overheating
b. Cover open
c. No print head
3. The buffer is empty when there is no data to be printed
and printing has ended.
Near end status inquiry
<EOT>
04
1. The following shows the status information.
Bit
Error
0
1
2
Near End Status
3
Out of Paper Error No Error
4
5
Near End Status
6
7
Conversion Switch High (SW: OFF)
2. This command is always enabled (even when Off-line).
"0"
Not Detected
Always Set to "0"
Not Detected
Always Set to "0"
– 57 –
"1"
Always Set to "1"
Always Set to "0"
Detected
Error
Detected
Low (SW: ON)