Table of Contents
Advertisement
Function
Code
Hex
Initial Value
Remarks
Function
Code
Hex
Remarks
Set bottom margin
<ESC> "N" n
1B 4E n
n = 0
Sets the bottom margin to n lines at the current line pitch.
1. Settings for printing 36 lines or less on one page are
ignored.
2. Bottom margin is reset with the following commands.
a. n line page length setting.
b. Page length setting using 24 mm.
c. Page length setting using mm.
d. Parameter n = 0 in this command.
e. Cancel bottom margin (ESC 0).
f. When the power is turned ON.
3. The margin does not change when you change the
pitch of a line after making this setting.
4. If the position is in the margin when you made this
setting, it will take effect from the next page.
Cancel bottom margin
<ESC> "O"
1B 4F
Cancels the bottom margin.
– 24 –
Advertisement
Table of Contents
