Table of Contents
Advertisement
Function
Code
Hex
Remarks
Function
Code
Hex
Remarks
Function
Code
Hex
Remarks
Function
Code
Hex
Remarks
Deselect printer
<DC3>
13
This code deselects the printer. All data is disabled until
the DC1 code is received.
Set select mode
<DC1>
11
This code selects the printer.
Beep the printer
<RS>
1E
This makes a short warning beep from the printer.
There is not buzzer on this printer so this code is ignored.
Initialize printer
<ESC> "@"
1B 40
1. This cancels all conditions set after the printer was
turned ON and returns the printer to the status before
turning it ON.
2. The following settings are not cancelled.
a. Line buffer
b. Data buffer
c. Settings for pulse of the drive of the peripheral
device (ESC BEL n1 n2).
– 55 –
Advertisement
Table of Contents
