Commands to Set the Page Format
Function
Code
Hex
Remarks
Function
Code
Hex
Initial Value
Remarks
Set page length in lines
<ESC> "C" n
1B 43 n
Sets the length of one page using the current line spacing
where n is the line pitch.
1. When n = 0, the length of the page is set to 24 mm
(ESC C NULL n).
2. The current line becomes the top of the page.
3. The bottom margin settings are reset.
4. Change the line spacing after making the setting does
not change the length of the page.
5. The power ON default is 42 lines.
Set page length in inches
<ESC> "C" <0> n
1B 43 00 n
n = 7
Sets the length of the page to n x 24 mm.
1. The current line becomes the top of the page.
2. The bottom margin settings are reset.
– 23 –