Star Micronics TSP2000 Programmer's Manual page 21

Function
Code
Hex
Initial Value
Remarks
Function
Code
Hex
Remarks
Function
Code
Hex
Remarks
Sets the magnification rate in character width.
<ESC> "W" n
1B 57 n
n = 0
Prints subsequent data expanded in width by the value
set by n .
n Action
0 Resets character width (same as DC4)
1 Sets horizontal expansion to a multiple of 2.
2 Sets horizontal expansion to a multiple of 3.
3 Sets horizontal expansion to a multiple of 4.
4 Sets horizontal expansion to a multiple of 5.
5 Sets horizontal expansion to a multiple of 6.
The value of n can be set to 0 (00H) to 5 (05H) or "0"
(30H) to "5" (35H).
Sets the printing magnified double in character height.
<ESC> <SO>
1B 0E
Doubles the width of subsequent print data, including
character spacing pitch, vertically.
Resets the printing magnified in character height.
<ESC> <DC4>
1B 14
Resets the printing expanded in character height.
– 18 –