Table of Contents
Advertisement
Commands to Control Peripheral Devices
Function
Code
Hex
Remarks
Function
Code
Hex
Remarks
Define drive pulse width for peripheral device #1
<ESC> <BEL> n1 n2
1B 07 n1 n2
1. Sets the energizing time for drive of the peripheral
devices (such as cash drawer, etc.) and the delay
time.
2. Energizing time is n1 x 10 (ms); Delay time is n2 x 10
(ms).
3. After printing, the following commands are executed.
a. Drive command A (BEL) for peripheral device 1.
b. Drive command B (FS) for peripheral device 2.
4. No error is output if the delay time (n1>n2) is set to a
time shorter than the energizing time.
Control peripheral device #1
<BEL>
07H
1. Drives the peripheral devices using the conditions set
by the pulse width for drive of the peripheral device 1
(ESC BEL n1 n2 ).
2. The command is executed after processing all data
that was received before the code.
3. This is not executed until the drive for peripheral
device 2 is completed.
– 51 –
Advertisement
Table of Contents
