Star Micronics TSP2000 Programmer's Manual page 22

Function
Code
Hex
Initial Value
Remarks
Function
Code
Hex
Initial Value
Remarks
Sets the magnification rate in character height.
<ESC> "h" n
1B 68 n
n = 0
n Action
0 Resets character width (same as ESC DC4)
1 Sets vertical expansion to a multiple of 2.
2 Sets vertical expansion to a multiple of 3.
3 Sets vertical expansion to a multiple of 4.
4 Sets vertical expansion to a multiple of 5.
5 Sets vertical expansion to a multiple of 6.
The value of n can be set to 0 (00H) to 5 (05H) or "0"
(30H) to "5" (35H).
Underlining
– " n
<ESC> "
1B 2D n
n = 0
Designates underlining for subsequent data by the value
of n.
n Action
0 Cancels underline mode.
1 Sets underline mode.
The value of n can be set to 0 (00H) or "0" (30H), or 1
(01H) or "1" (31H).
– 19 –