Table of Contents
Advertisement
8) If processing of an argument outside of the defined
range is processed with the second NV bit image data
group, processing of this command is stopped and
writing to the flash memory starts.
The NV bit image defined partway at that time is invalid
(undefined) but the previous NV bit image is valid.
9) d is the defined data.
'1' is set for the bit corresponding to the dots to print, '0'
is set for the bit corresponding to the dots not to print.
10) Defines the nth NV bit image in rising order from the NV
bit image number 01H.
Therefore, the initial data group [xL, xH, yL, yH d1 ... dk]
becomes the number 01H NV bit image and the last data
group [xL, xH, yL, yH d1 ... dk] becomes number n of the
NV bit image.
This matches the NV bit image number to specify with
the NV bit image print command (ESC FS p).
11) Defined data of one NV bit image is configured by [xL,
xH, yL, yH d1 ... dk].
12) TSP2000:
The maximum 1M bit of the definition range on this
printer is 128KB.
A plurality of NV bit image definitions are possible, but
definition of bit images exceeding the 1M bit (128KB) for
the total capacity of all (bit image data + headers) is not
possible.
TSP552/552II:
The maximum 2M bit of the definition range on this
printer is 256KB.
A plurality of NV bit image definitions are possible, but
definition of bit images exceeding the 2M bit (256KB) for
the total capacity of all (bit image data + headers) is not
possible.
13)The macro definition is cancelled and processing of this
command is started if this command is processed while
defining the macro.
14) This command executes only the NV bit image definition
and does not accompany the print operation.
Printing of the NV bit image is executed by the NV bit
image print command (ESC FS p).
– 44 –
Advertisement
Table of Contents
