Star Micronics TSP2000 Programmer's Manual page 32

Function
Code
Hex
Remarks
Function
Code
Hex
Remarks
Function
Code
Hex
Remarks
Function
Code
Hex
Remarks
Set line spacing to 4 mm
<ESC> "z" "1"
1B 7A 31
Sets the distance of subsequent paper feeds to 4 mm.
Set line spacing to 3 mm
<ESC> "0"
1B 30
Sets the distance of subsequent paper feeds to 3 mm.
One time n/4 mm feed
<ESC> "J" n
1B 4A n
Prints data in the line buffer and feeds paper n/4 mm.
1. If there is no data prior to this code, only a paper n/
4mm paper feed occurs.
2. If the bottom margin is exceeded, paper is fed to the
top of the next page.
3. You cannot change the line pitch.
One time n/8 mm feed
<ESC> "I" n
1B 49 n
Prints data in the line buffer and feeds paper n/8 mm.
1. If there is no data prior to this code, only a paper n/
8mm paper feed occurs.
2. If the bottom margin is exceeded, paper is fed to the
top of the next page.
3. You cannot change the line pitch.
<ESC> "z" <1>
1B 7A 01
– 29 –