Table of Contents
Advertisement
Function
Code
Hex
Remarks
Function
Code
Hex
Remarks
A maximum of 16 horizontal stops can be set.
ESC D NULL rests all horizontal tab positions.
1. When the tab position setting nk is equivalent to the
previous set position nk-1 or is smaller, the horizontal
tab setting is considered to be complete.
2. Tab positions are set and do not move even if the
character pitch and left and right margins are changed
after making the settings.
3. When k >16, or when it is nk is greater than or equal
to nk-1, data up to the NULL code is ignored.
Absolute position setting
<ESC> <GS> "A" n1 n2
1B 1D 41 n1 n2
Sets the absolute position based on the left margin
position for starting the next printing.
The start of the next printing is the [(n1 + n2 x 256) x
basic calculated pitch] inch position from the left margin
position.
Relative position setting
<ESC> <GS> "R" n1 n2
1B 1D 52 n1 n2
Sets the relative position based on the current position
for starting the next printing.
The start of the next printing is the [(n1 + n2 x 256) x
basic calculated pitch] inch position from the current
position.
– 31 –
Advertisement
Table of Contents
