Determining Shutter Operation During Projector On Sequence - Christie Mirage SST-6P User Manual

h) For the remaining three points, repeat steps a to g.
14. To enable color uniformity, select Color Uniformity Mode > Horizontal 1D Color
Uniformity and to confirm your selection, select Enter.
15. To verify 1D color uniformity is working, enable a flat white test pattern.
Determining shutter operation during projector
on sequence
Enables or disables the opening the shutter during the projector power on sequence.
When this setting is changed, it is applied during the time the laser is powered on and is persistent
over AC cycles.
1. Select MENU > Configuration > Light & Output Settings > Shutter Inhibit.
2. To disable the shutter opening automatically during power on, select Enter.
The checkbox is selected and the shutter remains closed when the laser is powered on and
must be opened manually.
3. To enable the shutter opening automatically during power on, select Shutter Inhibit again to
clear the checkbox.
Mirage SST User Guide
020-102993-06 Rev. 1 (10-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Configuring system settings
43