Setting up Christie View
Christie View allows up to four different video sources to be displayed on one screen at the same time.
The system displays up to four inputs from a single projector simultaneously, which enables multiple
viewers to observe up to four different experiences.
When Christie View is enabled the projector ingests up to four different video inputs. Each user views
one of the four 2K—2048x1080 (Griffyn Series and Mirage SST)/1920x1080 (Christie M 4K RGB
Series)—video sources at 60Hz. Each user views the projected output through a pair of active shutter
glasses.
Required components
The following components are required.
Christie View
•
Mirage Pro license
•
DB9 to mini DIN3 2 m harness
Additional components
•
Christie Twist 2.5
•
Active shuttered glasses (recommend model: XPAND X105-RF-X1):
•
Two pairs for 4-port, 2-viewer 3D glasses
•
Four pairs for 4-port, 4-viewer 2D glasses
•
RF transmitter (recommended model: XPAND AD025-RF-X1)
Video source
•
For Mirage SST only, inputs connected into any of the following layouts:
•
[0-1], [0-2], [0-3], [0-4]
•
[1-1], [1-2], [2-1], [2-2]
•
[3-1], [3-2], [4-1], [4-2]
•
For Griffyn Series and Christie M 4K 25 Series only, inputs connected to SDI1, SDI2, SDI3, and
SDI4
•
2K—2048x1080 (Griffyn Series and Mirage SST)/1920x1080 (Christie M 4K RGB Series)—
resolution at 60 Hz required on all inputs
Mirage SST User Guide
020-102993-06 Rev. 1 (10-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
55