Product Documentation; Related Documentation - Christie Mirage SST-6P User Manual

• E—Represents the top view of the projector.
• F—Represents the side view of the projector.
For information detailing the hazard distance for each lens, refer to the Mirage SST Installation and
Setup Guide (P/N: 020-102956-XX).
For Installations in the United States
The following must be in place for laser-illuminated projector installations in the United States:
• Permanent show installations containing Risk Group 3 laser-illuminated projectors must meet
the following conditions:
• Installed by Christie or by Christie-authorized and trained installers.
Refer to the EXTERNAL - Laser safety awareness training (Course code: CS-ELSA-01) on
the http://www.christieuniversity.com site.
• Performed according to instructions provided by Christie.
• Ensure the projection system is securely mounted or immobilized to prevent unintended
movement or misalignment of the projections.
• The projection room shall be clearly identified by the posting of laser warning and restricted
access signs. The projection room sign must display the warning "Class 1 Risk Group 3 Laser
Controlled Area No Direct Exposure to Beam Shall be Permitted".
• The Christie Laser Projection System Installation Checklist must be fully completed after the
installation and sent to lasercompliance@christiedigital.com. A copy can remain on-site. This
checklist can be found as a separate document in the accessory box with the manual.
• Certain US states have additional laser regulatory requirements. Contact
lasercompliance@christiedigital.com for additional regulatory requirements.

Product documentation

For installation, setup, and user information, see the product documentation available on the Christie
website. Read all instructions before using or servicing this product.
1. Access the documentation from the Christie website:
• Go to this URL: http://bit.ly/2TI2aEW or
https://www.christiedigital.com/en-us/3d/products-and-solutions/projectors/mirage-sst.
• Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, switch to the Downloads tab.

Related documentation

Additional information on this product is available in the following documents.
• Mirage SST Product Safety Guide (P/N: 020-102992-XX)
Mirage SST User Guide
020-102993-06 Rev. 1 (10-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Introduction
10