Projector Led Shutter Indicators; Turning Off The Projector; Aligning The Image - Christie M RGB Series Installation And Setup Manual

LED State
Red Solid
Flashing
Off

Projector LED shutter indicators

Identify the shutter LED state colors and meaning.
LED
Solid magenta
Off

Turning off the projector

When powering off in preparation for inspection or maintenance, always disconnect from AC.
1. To turn the light source off using the projector keypad, press and hold the
hear a beep.
To turn off the light source using the remote, press and hold the OFF button until you hear a
beep.
When powering off the projector, allow the projector to complete its cool down cycle. Do not
immediately unplug the projector if this can be avoided.
2. To turn off power to the projector, turn off the projector breaker switch.
3. Disconnect the power supply cord.

Aligning the image

Only perform image alignment after the projector is fully assembled and powered up in its final
location.
Basic image alignment ensures the image reflected from the DMDs is parallel and well-centered with
the lens and screen. This initial optical alignment is the foundation for optimizing images on the screen
and must be completed before final boresight adjustments. Before beginning, make sure the projector
is properly positioned in relation to the screen.
1. Ensure the projector is positioned in the throw distance range for the particular lens.
2. Display a test pattern.
3. Do a quick preliminary focus and (if available) zoom adjustment with the primary lens.
Christie M RGB Series Installation and Setup Guide
020-103483-04 Rev. 1 (04-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Error in
standby
Error
AC off
State
Shutter closed
Shutter open
Description
down. A problem exists with the projector that
does not prevent it from operating.
Projector is in standby. An error exists that
prevents the projector from starting up.
An error with the projector exists during startup,
cool down, or when the light source is off. Projector
will proceed to shut down.
The AC power is off.
Description
The shutter is closed.
In standby, the shutter is always automatically closed and
the magenta light is muted.
The shutter is open.
Installation and setup
button until you
30