Table of Contents
Advertisement
3. Reconnect the external cables and power cords; then, turn on the attached devices and turn on the
server.
Replacing the lower bezel
This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x).
To install the lower bezel on the 5U server model with hot-swap power supplies (Model name: 2582-F4x),
complete the following steps.
1. Insert the two bottom tabs on the lower bezel into the corresponding holes in the front of the chassis.
.
Chapter 2
Installing optional devices
71
Advertisement
Table of Contents
Troubleshooting
