Lenovo System x3100 M4 Installation And Service Manual page 446

• I.1800D: [I.1800D] A cache associativity mismatch has been detected for one or more processor
packages.
[I.1800D] A cache associativity mismatch has been detected for one or more processor packages.
Severity: Error
User Response:
Complete the following steps:
1. Verify that matching Processors are installed in the correct Processor sockets according to the
service information for this product.
2. Check IBM support site for an applicable service bulletin or firmware update that applies to this
Processor error.
3. (Trained Service technician only) Replace the system board.
• I.1800E: [I.1800E] A processor model mismatch has been detected for one or more processor
packages.
[I.1800E] A processor model mismatch has been detected for one or more processor packages.
Severity: Error
User Response:
Complete the following steps:
1. Verify that matching Processors are installed in the correct Processor sockets according to the
service information for this product.
2. Check IBM support site for an applicable service bulletin or firmware update that applies to this
Processor error.
3. (Trained Service technician only) Replace the system board.
• I.1800F: [I.1800F] A processor family mismatch has been detected for one or more processor
packages.
[I.1800F] A processor family mismatch has been detected for one or more processor packages.
Severity: Error
User Response:
Complete the following steps:
1. Verify that matching Processors are installed in the correct Processor sockets according to the
service information for this product
2. Check IBM support site for an applicable service bulletin or firmware update that applies to this
Processor error.
3. (Trained Service technician only) Replace the system board.
• I.18010: [I.18010] A processor stepping mismatch has been detected for one or more processor
packages.
[I.18010] A processor stepping mismatch has been detected for one or more processor packages.
Severity: Error
User Response:
Complete the following steps:
1. Verify that matching Processors are installed in the correct Processor sockets according to the
service information for this product.
System x3100 M4 Installation and Service Guide
432