Mitel MIVOICE OFFICE 400 6940 SIP User Manual page 73

destination. The KT line key belonging to the KT line shows the status of
the KT line through an LED and allows you to accept calls which are made
to this KT line.
Your phone becomes a key telephone as soon as your system administra-
tor has assigned a KT line to a configurable key. With the configuration of a
KT line key, your system administrator will also set up a personal line on
which you can make your personal calls. All other function keys retain their
function.
You can assign up to nine priority levels to your line keys.
KT lines can only be configured for the function keys T1-T48. You can also
configure KT lines on the Mitel M695 expansion key module.
Answering a call on the KT line key
You are being called on one or more KT line keys. The KT line key(s) flash
quickly. You want to answer a call on a KT line key.
If you want to answer a call on another KT line key first, press this KT line
key in order to pick up the call. If you pick up the handset without pressing
a KT line key, you will be connected to the highest priority KT line.
Note: If an incoming call meets a busy KT line, the call is forwarded to the sec-
ond KT line, etc. Only if no more KT lines are available will your caller hear
a busy tone.
Pick up the handset.
➔
Connection to the KT line with the highest priority.
Or:
1. Press KT line key.
➔
KT line is selected.
2. Pick up the handset.
➔
Connection to the selected KT line.
Initiating a call via a KT line key
You want to make a call via a KT line key.
You can call via any free KT line key. Each KT line key has its own call
number. This means that, by phoning, you transmit the call number associ-
ated with the active KT line key.
Mitel 6940 SIP
eud-1765/1.0 – R5.0 HF1 – 08.2017
Phoning
73