Mitel Superset 4025 Instructions

Hide thumbs Also See for Superset 4025:

SUPERSET 4025

TELEPHONE INSTRUCTIONS

To Place an Outgoing Telephone Call:

• Lift the handset

• Dial 9 + area code (local calls) or Dial 9 + 1 + area code (long

distance calls)

• Dial the number you wish to call

To Place an Internal Telephone Call:

• Lift the handset

• Dial extension number

To Place a Call on Hold

• With a call on the line, press Hold

To Reconnect with Caller

• Press the flashing line key

Transferring a Call

• With caller on the line, press TRANS/CONF on your phone set

• Dial the appropriate extension number or outgoing telephone number

• Then hang-up or announce the transfer and then, hang-up to transfer call

• Press Cancel to return to caller

Conferencing Calls

• With a caller on line, press TRANS/CONF

• Dial second party (internal or external)

• Wait for an answer, repeat if adding more callers

• Press TRANS/CONF to bring all parties together

To Disconnect from a Conference Call

• Hang-up

Table of Contents

Need help?

Do you have a question about the Superset 4025 and is the answer not in the manual?

Page 1 SUPERSET 4025 TELEPHONE INSTRUCTIONS To Place an Outgoing Telephone Call: • Lift the handset • Dial 9 + area code (local calls) or Dial 9 + 1 + area code (long distance calls) • Dial the number you wish to call To Place an Internal Telephone Call: •...
Page 2 Ringer Adjust • Volume – press * to adjust – press ARROW key to change the volume and press # to SAVE • Pitch – press * to adjust – press ARROW key to change the pitch and press # to SAVE Handsfree Operation To Use Handsfree Operation to Make Calls: •...
Page 3 • Dial the destination number, i.e., 7401 for voicemail • Press the down arrow to SAVE the changes Note: When using a Superset 4025, 5224 IP or 5324 IP telephone, please use the softkeys (located directly below the telephone screen) to navigate menus after pressing the superkey.
Page 4 To Change or Clear a Speed Call: • Press * to CHANGE or # to CLEAR • Dial “9” + area code and phone number or extension number • Press the PERSONAL KEY again • If you want the number to be private, press the * or # to keep number visible •...