Mitel MIVOICE OFFICE 400 6940 SIP User Manual page 19

Function key configuration (default key setting) -
Overview
The Mitel 6940 SIP phone on the MiVoice Office 400 communication sys-
tem are delivered with the default function key configurations summarized
in the following table. Note that your system administrator might change
the default configuration and your phone configuration might therefore dif-
fer from the default configuration.
Function key Mitel 6940 SIP
Key T1 Personal Line 1
Key T2 Personal Line 2
Key T3-T48 Empty
Key S1 System menu
Key S2 Call forwarding menu
Key S3 Take (pick up own call)
Key S4 Call routing menu
Key S5 Phone lock on/off
Key S6 Request a callback
Key S7-S30 Empty
Alphanumeric keyboard - Overview
The alphanumeric keyboard has a dialpad with digits from 0 through 9, a *
key, and a # key. Of these, keys 2 through 9 contain letters of the alphabet.
These dialpad keys can be used for entering digits, password, text, and
special characters, and also for quickdial. You can use the alphanumeric
keyboard to dial a phone number to make a call and to press keys as
required by an Interactive Voice Response (IVR) system. Press the rele-
vant key repeatedly until the character you want is displayed.
The alphanumeric keypad is set to the characters listed in the following
table.
Upper case
0 +
1 . : ; =_ , - ' & ( ) [ ] $ !
Mitel 6940 SIP
eud-1765/1.0 – R5.0 HF1 – 08.2017
Keys, Display, and Menu Guidance
Mitel 6940 SIP if defined as free seating
phone
Personal Line 1
Personal Line 2
Empty
System menu
Free seating: Log in/out
Request a callback
Empty
Empty
Empty
Empty
Lower case
0 +
1 . : ; =_ , - ' & ( ) [ ] $ !
19