Mitel MIVOICE OFFICE 400 6940 SIP User Manual page 59

Table of Contents

Advertisement

Function
Call forw. if busy (CFB) to
user on/off
Call forw. if busy (CFB) to
VM on/off
Call forw. on no reply
(CFNR) to user on/off
Call forw. on no reply
(CFNR) to VM on/off
Call forwarding menu
Call forwarding protection
on/off
Call list: Menu
Call list: Answered calls
Call list: Redial list
Call list: Unanswered
Call transfer
Control output on/off
Discreet ring on/off
Do not disturb (busy)
on/off
Do not disturb (forward-
ing) on/off
Empty
Mitel 6940 SIP
eud-1765/1.0 – R5.0 HF1 – 08.2017
Description
If you are busy, incoming calls will be forwarded to
specific destination (user).
If you are busy, incoming calls will be forwarded to
specific destination (voice mail).
Incoming calls are forwarded to another destination
(user).
Incoming calls are forwarded to another destination
(voice mail).
Direct access to the system menu
chapter "Call forwarding", page 66).
Call forwarding to your phone is not allowed.
Direct access to the system menu
Call list for answered calls.
Call list for dialled call numbers.
callsCall list for unanswered calls.
Transfer a call to another user with or without prior
notice.
You can control external electric equipment or instal-
lations using control outputs. For example you can
use your phone to open and close electric gates or to
switch the lights on or off throughout a building.
When this function is on, the phone only rings once.
For further information, please see "Activating dis-
creet ring", page 49.
Your phone does not ring and is set to busy for
incoming calls.
Your phone does not ring and is set to busy for
incoming calls. Incoming calls are automatically for-
warded to a destination that has been configured by
your system administrator.
The key assignment is configured with an empty
function. The key serves as a place-holder. If config-
uration on any key is deleted, the configurations on
the subsequent keys shift their position. This can be
avoided if instead of deleting the configuration, you
configure the
Empty
Forwarding
Call
list.
function on that key.
Phoning
(see
59

Advertisement

Table of Contents
loading

Table of Contents