Table of Contents
Advertisement
Notes:
• Your system administrator must grant you intrusion rights.
• Intrusion may infringe on your national data protection provisions or be
permitted only under certain circumstances. If you intend to use this
function, you should therefore notify your call party in advance.
Activating intrusion (the users are talking):
1. Press the function key for Intrusion.
2. Enter the call number of the user you want as per the key configuration.
➔
The intrusion tone indicates that the function has been activated.
➔
If the user has blocked intrusion, connection set up will be cancelled.
Answering intrusion:
Press the
➔
You will be connected with the user who has activated intrusion; the first call
party is put on hold.
Rejecting intrusion:
Press the
➔
Intrusion will be rejected; you remain connected to your first call party.
Activating/answering silent intrusion
Silent intrusion (intrusion without prior notice) is a variation of the intrusion
function and is primarily used in call centres.
Another user can connect to your active call and listen to the conversation
without you or your call party noticing. Unlike with intrusion, there is neither
a display nor a sound signal to indicate use of the function.
You cannot reject silent intrusion (but you can block it; see chapter "Pro-
tecting yourself against calls", page 91). The microphone of the third user
remains off. The third user can, however, enter the conversation at any
point by enabling his or her microphone or pressing the intrusion function
key.
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 97).
Notes:
• Silent intrusion must be enabled in the communication system.
• Your system administrator must grant you silent intrusion rights.
• Silent intrusion may infringe on your national data protection provisions
or be permitted only under certain circumstances. If you intend to use
this function, you should therefore notify your call party in advance.
Mitel 6940 SIP
eud-1765/1.0 – R5.0 HF1 – 08.2017
Answer
softkey.
End
softkey.
Phoning
51
Advertisement
Table of Contents
