Table of Contents
Advertisement
Phoning
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 97).
Parking the active call party:
Press the function key for
➔
The call party is parked. The LED of the function key is red.
Notes:
The display returns to idle. The person you talked to will remain parked until they
put down the handset.
Recommence conversation with the parked call party:
1. Press the function key for Park.
➔
2. Pick up the handset.
➔
Enquiry call during a call
You want to call someone else briefly without losing your current call part-
ner. Then you want to resume your conversation with your original call
partner.
With the Enquiry function you can call someone else in the middle of a call
and put your original call partner on hold. You can make enquiry calls to
both internal and external users.
Setting up an enquiry call (you are in a call):
Press a free line key.
Enter the call number of the enquiry partner and press the
➔
Enquiry call party is called; first call partner is put on hold.
Notes:
• You can also set up an enquiry call by pressing the busy lamp field key to
which you have saved the enquiry call party.
• If the other user does not answer, you can cancel the enquiry call with the
Cancel
flashing line key.
Ending the enquiry call:
Press the
Recommence conversation with the first call party:
Press the
42
Hand-free mode is activated.
You are connected via the handset.
softkey or with the End key and recommence the first call with the
Drop
or the End softkey.
Pick up
softkey or the flashing line key.
Park
and put down the handset.
Dial
softkey.
Mitel 6940 SIP
eud-1765/1.0 – R5.0 HF1 – 08.2017
Advertisement
Table of Contents
