Table of Contents
Advertisement
When Programming Emergency Numbers and (or) Making Test Calls to
Emergency Numbers
• Remain on the line and briefly explain to the dispatcher the reason for
the call
• Perform such activities in the off-peak hours, such as early mornings or
late evenings.
ALLOWING THIS EQUIPMENT TO BE OPERATED IN SUCH A MANNER AS
TO NOT PROVIDE FOR PROPER ANSWER SUPERVISION IS A VIOLA-
TION OF PART 68 OF THE FCC's RULES
Proper Answer Supervision is when
• This equipment returns answer supervision signals to the PSTN when
DID calls are
– answered by the called station
– answered by the attendant
– routed to a recorded announcement that can be administered by the
– routed to a dial prompt.
• This equipment returns answer supervision on all DID calls forwarded
to the PSTN. Permissible exceptions are
– a call is unanswered
– a busy tone is received
– a reorder tone is received.
This equipment is capable of providing users access to interstate providers
of operator services through the use of access codes. Modification of this
equipment by call aggregators to block access dialing codes is a violation
of the Telephone Operators Consumers Act of 1990.
Federal Communications Commission (FCC)
Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equip-
ment generates, uses, and can radiate radio frequency energy; if not
installed and used in accordance with the instruction manual, it may cause
harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television recep-
Mitel 6940 SIP
eud-1765/1.0 – R5.0 HF1 – 08.2017
CPE user
Product and safety information, legal information
131
Advertisement
Table of Contents
