Furuno FCV-600 Installation Manual page 9

Hide thumbs Also See for FCV-600:

Table of Contents

1.2.1

Desktop and bulkhead mount

This unit is shipped with a hanger. Follow the steps below to mount the main unit on

a desktop or bulkhead. The figures of FCV-800 are used in this section.

1. Unfasten the knobs on either side of the main unit and detach the unit from the

hanger.

2. Drill four holes for the self-tapping screws at the mounting location.

Be sure to follow the recommended maintenance space shown in the outline

drawing. Insufficient space may cause damage to connectors when disconnecting

and reconnecting them.

3. Fix the hanger to the mounting location with four self-tapping screws (520, sup-

plied). The hanger should be oriented with the insertion slots facing forward.

Desktop mount

4. See section 2.1 to attach cables to the back of the main unit.

Note: Work on a soft cloth to avoid damaging the unit.

5. Fit the main unit to the hanger and tighten the bolts on either side evenly. Adjust

the angle of the main unit so that the screen can be viewed clearly.

6. Attach the hard cover to the main unit for LCD protection.

Desktop mount

Hanger

Bulkhead mount

1. MOUNTING

Knob

Table of Contents

Fcv-800