Table of Contents
Advertisement
Name
[TLL Output]
[Bottom Hardness] Shown only when the transducer that supports hardness* is
*: See the equipment list on page 2.
5. Press the MENU/ESC key twice to close the menu.
[Port Monitor] menu
Port Monitor window shows the data sentence information input to the [PWR/KP/
NMEA0183] port. Press the KNOB to display the latest data sentence information.
3.2.3
Information/reception status of NMEA2000
The [NMEA2000] window allows you to view information/reception status of
NMEA2000 devices that are on the same NMEA2000 network as the unit. You can
also change settings related to output of NMEA2000.
1. Press the MENU/ESC key to show the main menu.
2. Select [Network] and press the KNOB.
3. Select [NMEA2000] and press the KNOB.
Output the position specified by the MARK key to the connected
plotter.
• [Off]: Do not output latitude/longitude.
• [TLL]: Output latitude/longitude.
• [FURUNO-TLL]: Output latitude/longitude, depth and water
temperature. Requires [FURUNO-TLL] enabled device.
connected. Select [On] to output the hardness sentence (SDbhr).
$GPGGA, 095354. 76, 0959. 673, S, 09959. 59, W, 0, 00, 0. 0
, 0. 0, M, 0. 0, M, 0. 0, 0000*44*6E<0d><0a>
$GPGLL, 3442. 67330, N, 13520. 59237, E, 095354. 92, A, A
*63*4C<0d><0a>
$GPGNS, 095355. 03, 3443. 4, N, 13521. 4, E, A, 00, 0. 0, 0.
0, 0. 0, 0. 0, 0. 0*3F*60<0d><0a>
$GPHDG, 255. 00000, 0. 0, E, 0. 0, E*5C*00<0d><0a>
$GPHDT, 255. 00000, T*37*19<0d><0a>
$GPMTW, 9. 00000, C*3D*60<0d><0a>
$GPMWV, 180. 00000, R, 10. 00000, K, A*17*3B<0d><0a>
32
3. INITIAL SETTINGS
Explanation
Advertisement
Table of Contents
