Table of Contents
Advertisement
3. INITIAL SETTINGS
For [Client Mode]
1) Select [Connect Network Setting] and press the KNOB.
2) With [Available Network] selected, press the KNOB.When an available network
near the unit is detected, the name of the network is displayed in the [Network List]
window.
3) Select the network to connect and press the KNOB. The following window will be
displayed.
4) Select [Connect] and press the KNOB.
[Password] setting window will be shown.
Note: If you want to erase the password for the last connected network, select
[Forget] before [Connect]. The password will be erased all at once, making it easier
to enter the new password when connecting to a different network.
5) Enter the password for the network.
See page 35 ''For [AP Mode] (local network setting)'' to select the typing mode. Af-
ter entering the password and when the connection to the network is complete, the
"Connecting..." message will disappear and the wireless LAN icon (
pear in the upper right corner of the screen. The LAN icon indicates that access
point other than the FCV is being used. If the message "Connection failed" is dis-
played, the password you entered may be incorrect. Press the MENU/ESC key
and repeat step 3) to 5).
Note: Bar on the wireless LAN icon indicates the signal strength.
Symbol
3 (
2 (
Network List
FG
Router
[MENU]
Router
Cancel
Forget
Connect
[MENU]
Meaning
Strong
)
Average
)
Select
Enter
Back
Network name
Select
Enter
Back
Symbol
Weak
1 (
)
Extremely weak/ No connection
0 (
)
37
) will ap-
Meaning
Advertisement
Table of Contents
