Table of Contents
Advertisement
3. INITIAL SETTINGS
[Sensor In Use] list
You can check the data sources of the currently used sensors in the [Sensor In Use]
of the [Network] menu. If no data is entered, [--------] will be displayed.
3.2.2
NMEA0183 port settings (FCV-800 only)
Adjust the nav equipment settings connected to the [PWR/KP/NMEA0183] port.
1. Press the MENU/ESC key to show the main menu.
2. Select [Network] and press the KNOB.
3. Select [NMEA0183] and press the KNOB.
4. See the below table to adjust the NMEA0183 settings.
Name
[Format]
[Baudrate]
[NMEA Output]
Example of FCV-800 display
Select the version of nav equipment connected to [PWR/KP/
NMEA0183] port. Available versions are [Ver 1.5], [Ver 2.0] or
[Ver 3.0/4.0/4.1].
Select [4800bps] or [38400bps] for the baudrate.
Select what data sentences to output.
• [Off]: Do not output the NMEA0183 data sentences.
• [On]: Output the NMEA0183 data sentences. However, do not
output data that is input from other equipment.
31
Explanation
Advertisement
Table of Contents
