3.
INITIAL SETTINGS
3.1
Language and Transducer Settings
1. Press the
2. Select your language, then press the KNOB. The units for depth, water tempera-
ture, fish length, ship speed, wind speed and distance are set according to the lan-
guage selected. Continue the procedure to select the transducer.
3. Select [XDR Type] (for FCV-600) or [XDR1 Type] (for FCV-800) and press the
KNOB.
4. Select the model of transducer connected to the [XDR] (for FCV-600) or [XDR1]
(for FCV-800) port and press the KNOB. If you use a model of CW transducer that
/BRILL key to show the [Installation] menu.
For FCV-600
For FCV-600
28
For FCV-800
For FCV-800