Table of Contents
Advertisement
3) Change to the desired name (maximum 32 characters).
a) Select the typing mode (abc, ABC, ?123, ~[<) and press the KNOB.
Text entry cursor
Typing mode
Typing mode: Alphabet (lowercase letters)
Typing mode: Numerical
b) Select a character and press the KNOB.
c) Repeat a) and b) and type the name.To delete any character, select [←] or [→]
and press the KNOB to move the cursor to the character you want to delete.
Then select [Del] and press the KNOB.
d) Select [Enter] and press the KNOB.
4) Select [Password] and press the KNOB.
5) Refer to step 3) above and change the password (maximum 40 characters).
Depending on the [A/*] setting, the password will appear as follows.
Plaintext: Displays all typed characters.
Ciphertext: Typed characters are displayed as "*".
6) In case of difficulty to connect due to multiple LAN environments, change the chan-
nel settings.
a) Select [Channel Setting] and press the KNOB.
b) Select a channel (from 1 to 11) and press the KNOB.
7) Press the MENU/ESC key.
''Restart to apply changes?'' message appears.
8) Select [Yes] and press the KNOB.
Typing mode: Alphabet (uppercase letters)
Typing mode: Symbol
Switch between plain text
and symbols display
36
3. INITIAL SETTINGS
Advertisement
Table of Contents
