Light Source - MICRO-EPSILON surfaceCONTROL 3D SC3200-80 Operating Instructions Manual

Light Source

2. Light Source
The surfaceCONTROL 3D 32xx sensor works with an LED lighting unit. Measurement is performed using blue light at the
dominant 459 nm wavelength. The sensor is included in risk group 2 according to EN 62471: 2008.
Do not look into the lens. Consciously close your eyes or immediately turn away if the optical radia-
tion enters the eye.
The warning sign below is attached to the sensor housing on the top and bottom:
Fig. 1 LED warning sign
i
If both warning labels are covered over when the unit is installed, the user must ensure that supplementary labels
are applied.
surfaceCONTROL 3D SC3200 / SC3210 Page 7