Heartland VALUE Series Assembly Manual page 64

PARTS REQUIRED:
BEGIN
Mount (1) barrel bolt flush at top of OO on left door using 3/4" screws
1
as shown (Fig A).
Mount the second barrel bolt flush at bottom of OO on left door using 3/4" screws
2
as shown (Fig B).
3
With door closed mark hole locations for bolts to extend into.
HINT: Extend bolts to leave marks in wood. Tap bolts with hammer.
Drill 3/8" holes deep enough for each bolt to slide into.
LEFT
DOOR
FINISH
Secure hasp and latch as shown using 3/4" screws. You have finished mounting your
door hardware.
DOOR HARDWARE
x2
3/4" (1,9 cm) x8
35-1/2"
(90 cm)
x1
3/4" (1,9 cm) x7
Fig. A
HINT: With door closed
extend bolt and tap with
hammer to leave a mark in
wood for drilling.
Fig. B
3/4" (1,9 cm) Screw x7
Install on right door.
62
3/8" (9 mm) Drill Bit
Drill 3/8" hole
in-line with bolt.
Flush
on OO.
OO
OO
Flush
on OO
Drill 3/8" hole
in-line with bolt.
Fig. B