Heartland VALUE Series Assembly Manual page 61

PARTS REQUIRED:
x1 OO
69" Door Stiffener (175,3 cm)
Attach temporary support OO with (3) 3" screws.
3
Measure 72" (182,9 cm) down from underside of overhang (Fig. A).
Locate center of door
opening and mark.
Fig. A
72" from overhang
4
Center doors on mark as shown (Fig. B).
Check hinge board is fush under overhang (Fig. C).
Screw hinge boards into wall supports and floor using (10) 3" screws as shown.
5
Make sure screws go into framing and foor (Fig. D, E).
Remove temporary supports and enure that the doors open properly.
Fig. B
3/8"
(1 cm)
3" (7,6 cm)
Screws into the wall
support and foor frame.
FINISH
You have finished installing your doors.
DOORS
x12
OO
Center 3/8" measurement
on mark.
59
3" (7,6 cm)
72" (182,9 cm)
from bottom of
overhang to top
of ledger board
O O
Fig. C
Fig. D
Angle 3" (7,6 cm)
Screw
Fig. E
Flush