Heartland VALUE Series Assembly Manual page 45

PARTS REQUIRED:
x4 NQ
2 x 3 x 46-7/8" (5 x 7 x 119 cm)
Install the front trim, flush to peak and panel edge as shown.
3
4
Secure with (6) 1-1/4" screws from inside shed.
Repeat steps for opposite side wall.
NQ
9" (22,9 cm)
approximately
FINISH
Your trim is now installed. Proceed to installing your rafters.
Flush to
panel
TRIM
Flush
Flush to peak
43
x12
1-1/4" (3,2 cm)