Heartland VALUE Series Assembly Manual page 48

DOOR SUPPORT
PARTS REQUIRED:
x22
2" (5 cm)
x1
5/8 x 3-7/8 x 96" (1,6 x 9,8 x 244 cm)
Use exterior-rated wood glue behind support.
Apply to top plate and end of rafter
Position support flush with bottom edge of top plate and
2
side wall panel and attach with 2" nails, as shown.
Remove temporary brace after support is installed.
Glue
6"
Flush
(15,2 cm)
Flush
Flush
Remove
after door
arame support
is Installed.
Door opening
FINISH
You have finished your door frame support.
46