Heartland VALUE Series Assembly Manual page 29

PARTS REQUIRED:
x2
x1
RK
2 x 3 x 13" (5 x 7,6 x 33 cm) as spacer
6
Place center 48" panel on frame with primed side facing up.
Secure with 2" nails 6" spaced apart on edges and 12" apart inside panel.
Install (2) 48" panels on frame flush to
7
installed panel, with primed side facing up.
Secure with 2" nails 6" spaced apart on edges
and 12" apart inside panel.
FINISH
You have finished building your back wall.
BACK WALL
3/8 x 48 x 72"
(1 x 122 x 183 cm)
3/4" GAUGE
BLOCK
For squareness maintain
fush and 1-1/2" measurement
along panel edges.
Flush
12"
(30 cm)
6"
(15 cm)
For squareness maintain
fush and 1-1/2" measurement
along panel edges.
27
x192
2" (5 cm)
3/4"
(1,9 cm)
HINT:
1-1/2" Use RK as
(3,8 cm) 1-1/2" gauge
48"
(122 cm)
1-1/2"
Flush
(3,8 cm)
12"
(30 cm)
6"
(15 cm)
Primed
side up
(122 cm)
Primed
side up
HINT:
Use RK as
1-1/2" gauge
48"
There will be a
side overhang
at top and bottom