Dürkopp Adler 513 Operating Instructions Manual page 118

Error Description
M-317 Communication
error between
main PCB and
control panel
M-318 The memory
space for
external seam
patterns is full
M-319 External seam
pattern format
abnormal
M-320 Imported seam
pattern already
exists
M-321 Imported seam
patterns not
found
M-322 Error while
deleting seam
patterns
M-323 Error while
reading seam
patterns
M-324 USB read error
M-325 The size of the
imported seam
pattern is too
large
116
Possible cause
The communication between
the main PCB and the control
panel is non-existent or faulty.
While importing seam patterns
to the control panel via USB,
the system discovers that the
memory is full.
The seam pattern data is
classified as abnormal when
their format data is read by
the control panel.
While importing seam patterns
from a USB key, the system
finds that a seam pattern with
the seam number already exists
on the control panel.
While importing seam patterns
from a USB key, the system is
unable to find the seam pattern
to be imported.
While deleting the external
seam pattern, the system
discovers that the pattern does
not exist.
A problem has occurred while
reading seam pattern data from
the external memory area.
USB key not found.
While importing seam patterns,
the control panel detects that
the imported seam pattern
exceeds the size limit.
Operating Instructions 513/533 - 01.0 - 09/2023
Troubleshooting
Troubleshooting
• Switch off the machine and
switch it back on after waiting
for a while.
• Check the communication
cable, the main PCB and the
control panel.
• Export the internal seam
patterns first before deleting
them and import the seam
patterns again afterwards.
• Call up the parameter import/
export mode of the system
and delete such seam
patterns.
• Change the number of the
seam pattern on the USB key.
• Select patterns that are found
on the USB key.
• Select an existing seam
pattern for deletion.
• Please select other seam
patterns.
• Plug in the USB key again.
• Make sure the imported seam
pattern is within the
permissible size range.