Dürkopp Adler 513 Operating Instructions Manual page 50

48
18. The increment for the speed can be set to 100 rpm. Set the
value to 2000 using the
19. Complete the setting with a press of the button
20. Press the
Adjusting the zero point by setting the X-axis to 0.5 and
the Y-axis to -1.0
Important
This setting only applies to the currently selected seam pattern (P).
The global setting of the zero point is explained here ( p. 40).
21. Press the
22. Press the
 The alignment of the X-axis is displayed as 0.0 mm.
Fig. 33: Creating a new seam pattern (6)
23. The increment for the X-axis can be set to 0.1 mm. Set the
value to 0.5 mm using the
24. Press the
 The alignment of the Y-axis is displayed as 0.0 mm.
buttons.
button to finish the seam pattern registration.
button.
buttons
buttons
Operating Instructions 513/533 - 01.0 - 09/2023
Programming
.
buttons.