Sewing A Seam Pattern Sequence (C) - Dürkopp Adler 513 Operating Instructions Manual

52
6. Press the
 The symbol
patterns (P).
7. Change the desired seam pattern (P) by pressing the
buttons.
 The registered seam pattern number is displayed for editing.
8. Repeat the described steps as necessary.
9. To delete the seam pattern data, press the
10. Cancel the input of the seam pattern data and return to input
mode by pressing the button
 The changes you made are now saved.
4.5.3

Sewing a seam pattern sequence (C)

Fig. 38: Sewing a seam pattern sequence (C)
To sew a seam pattern sequence (C):
1. Switch on the machine.
2. Select the seam pattern sequence (C) mode using the
buttons.
3. Select the number of the seam pattern sequence (C) using
the buttons.
4. Press the
 The LED illuminates. The sewing foot moves and is raised.
5. Select the seam pattern (P) using the
button.
is displayed, and you can insert new seam
button.
Operating Instructions 513/533 - 01.0 - 09/2023
Programming
button.
.
buttons.