Dürkopp Adler 513 Operating Instructions Manual page 44

42
Fig. 24: Adjusting/changing the counter (2)
Variant B for calling up the counter:
1. When in programming mode (LED off), press the
 The submenu is displayed and allows you to adjust
the counter.
Selecting the counter type and changing the counter value
Fig. 25: Adjusting/changing the counter (3)
(1) - Counter type
To select the counter type and change the counter value:
1. Select the symbol of the counter type (1) using
the buttons.
2. Select the desired counter type (1) (see also  p. 43) using
the buttons.
3. Use the
4. Use the
(2) - Counter value
buttons to select the counter value (2).
buttons to enter the counter value (2).
Operating Instructions 513/533 - 01.0 - 09/2023
Programming
button.
①
②