Dürkopp Adler 513 Operating Instructions Manual page 117

Troubleshooting
Error Description
M-309 Seam pattern
beyond the
sewing area
M-310 Stitch length
outside of the
normal range
M-311 Seam
pattern data
communication
abnormal
M-312 Normal seam
pattern lock
abnormal
M-313 Current seam
pattern
parameters
abnormal
M-314 Parameter
setting above
normal range
M-315 Counter
abnormal
M-316 Counter
exhausted
Operating Instructions 513/533 - 01.0 - 09/2023
Possible cause
The system discovers during
the calculation that the seam
pattern is outside of the sewing
area.
During the calculation, the stitch
length is outside of the normal
range.
This error occurs when the
control panel transmits seam
pattern data to the control.
The control panel is unable to
read the normal seam pattern
lock data from the EEPROM.
The control panel is unable to
read the seam pattern
parameter data from the
EEPROM.
The value set for the parameter
exceeds the normal range.
The control panel is unable to
read the counter data from the
EEPROM.
The counter has reached the
upper limit after sewing.
Troubleshooting
• Press the RESET button and
confirm that the size of the
seam pattern is within the
area set in the parameters
K056, K057, K058, and K059.
• Press the RESET button and
confirm the seam pattern and
the X/Y scale rate.
• Check the seam pattern and
the cable connection between
the control panel and the
control.
• Press the RESET button to
call up the system menu and
restore the default setting.
• Press the RESET button to
call up the system menu and
restore the default setting.
• Press the RESET button and
change the set value.
• Press the RESET button to
call up the system menu and
restore the default setting.
• Press the RESET button.
115