Dürkopp Adler 513 Operating Instructions Manual page 60

No.
U043 Brightness of LED on machine head
U046 No thread cutting allowed
U049 Adjust winding speed
U055 Start bartack not allowed for sewing on
buttons
U063 Method for adjusting the X/Y scaling
U135 Sewing foot movement prior to sewing 0 = positioned at seam
U200 Language
U212 Air valve separate presser foot
lowering
U213 Air valve separate presser foot lifting
U214 Availability of the top feed foot
58
Function Value range
0 to 10
0 = off
the higher the value,
the brighter the LED
0 = normal
1 = no thread cutting
800 to 2000
0 = start bartack
1 = no start bartack
0 = based on percentage
1 = based on size
beginning
1 = positioned at origin
Setting the language
0 = simultaneous
lowering
1 = lower left presser
foot first, then the right
presser foot
2 = lower right presser
foot first, then the left
presser foot
0 = simultaneous lifting
1 = lift left sewing foot
first, then the right
presser foot
2 = lift right sewing foot
first, then the left presser
foot
0 = prohibited
1 = available
Operating Instructions 513/533 - 01.0 - 09/2023
Programming
Unit Default
- 8
- 0
rpm 1600
- 0
%/mm 0
- 0
- Simpli-
fied
- 0
- 0
- 1