Dürkopp Adler 513 Operating Instructions Manual page 119

Troubleshooting
Error Description
M-326 External seam
pattern not
found
M-327 The seam
pattern to be
deleted is being
used by a
seam pattern
sequence
M-328 USB seam
pattern not
found
M-329 Non-registered
seam pattern
M-330 All normal seam
patterns
disabled
M-331 No further
registration of
seam patterns
M-332 No deletion of
the last seam
pattern
sequence
M-333 Alert for
lubricating the
machine
M-999 Non-defined
error
Operating Instructions 513/533 - 01.0 - 09/2023
Possible cause
When set to sewing readiness,
the system is unable to find the
external seam pattern that is
supposed to be read.
While deleting the seam
pattern, the system detects that
the seam pattern has been
added to certain seam pattern
sequences.
The seam pattern number to be
imported cannot be found
following the connection of the
USB key.
No seam pattern was created
before the mode for copying/
deleting the seam pattern or
seam pattern sequence is
called up.
All normal seam patterns were
locked before the mode for
registering seam patterns is
called up.
The system finds that all seam
patterns have been registered
before the mode for registering
seam patterns is called up.
The seam pattern sequence to
be deleted happens to be the
last one.
It is time to lubricate certain
parts of the machine to ensure
that the machine will keep
working.
Non-defined error of the control
panel.
Troubleshooting
• Please select other seam
patterns.
• Remote the seam pattern
from the seam pattern
sequence first and delete the
seam pattern afterwards.
• Make sure that the seam
pattern is named properly and
stored in the specified
directory on the USB key.
• Please create a seam pattern
before calling up these
modes.
• Please unlock the regular
seam patterns.
• Please delete a few seam
patterns before registering
new ones.
• Deleting the last remaining
seam pattern sequence is
prohibited.
• Lubricating the machine
• Restart the machine, enter
parameter 245 and press
the RESET button before
switching the machine back
on.
• Switch off the machine and
update the software of the
control panel.
117