Table of Contents
Advertisement
Configure the Connect IT 16/48
Section
DNS
Remote control
SNMP
Multicast
Service Discover (mDNS)
4. Click Save or Apply.
Monitor the data from the Connect IT
You can configure the network for the Connect IT.
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > Monitoring
3. Each sub-section enables you to configure a different monitoring method. Expand the sub-
section and complete the fields in each of the sections. To display information about what you
should enter in each field, click the down arrow and then Help next to each field.
Section
NetFlow probe
Device Health
intelliFlow
4. Click Save or Apply.
Reboot the Connect IT
You can choose to reboot the Connect IT from the local web user interface or from Remote Manager.
Digi Connect IT® 16/48 User Guide
Monitor the data from the Connect IT
Description
The DNS service provides a caching DNS server. This
server forwards queries to the DNS servers that are
associated with the network interfaces, and caches the
results.
Note
This server is used within the Connect IT, and cannot
be disabled. Use the access control list to restrict external
access to this server.
Not available.
The SNMP service provides an SNMP agent for using
SNMP management on this Connect IT.
The multicast service provides a multicast route.
Provide discovery services via multicast DNS.
screen.
Description
Probe network traffic on this device and export statistics
to NetFlow collectors.
Device Health is a system monitor that collects and stores
metrics over a period to time and reports them to Digi
Remote Manager.
Reserved for future use.
43
Advertisement
Table of Contents
