Define A Custom Apn List - Digi Connect IT 16 User Manual

Configure the Connect IT 16/48
Setting
SIM failover alternative
APN list only
APN list
Custom gateway
IPv4
IPv6
4. Click Save or Apply.

Define a custom APN list

You can define a list of custom APNs to try when connecting to the cellular network.
1. Log in to manage the Connect IT.
2. Access the Modem
3. Expand the APN list section.
4. Enable the APN list only option.
5. Click Add or +.
6. In the APN field, enter the APN name used when connecting to the network.
Digi Connect IT® 16/48 User Guide
Description
The action to perform when the connection retries have
been exceeded but no other SIM is available to switch to.
None: Perform no alternative action.
n
Reset modem: Reset the modem if the SIM failover
n
feature is not enabled and thus automatic SIM
switching is not available.
Reboot device: Reboot the device if the SIM failover
n
feature is not enabled and thus automatic SIM
switching is not available.
Determine which APN should be used.
Enabled: When enabled, the APN list is used
n
exclusively. For more information, see
custom APN
Disabled: When disabled, configured APNs are tried
n
before the APNs built into the firmware are tried.
Define a list of custom APNs to try when connecting to the
cellular network. See
Configure a custom gateway/netmask that overrides the
automatic values normally provided. This is particularly
useful when supporting a group of static UP addresses that
communicate directly. See
the modem.
Configure an IPv4 network interface. See
network interface for the
Configure an IPv6 network interface. See
network interface for the
section.
Configure a modem
Define a
list.
Define a custom APN list.
Configure a custom gateway for
Configure an IPv4
modem.
Configure an IPv6
modem.
34