Advertisement
19. Fit the DP junction PWB using two
screws.
20. Connect the main-circuit PWB and the
DP relay circuit PWB with the FFC.
DP junction PWB (YC35)
21. Refit the DP junction PWB cover and
the rear cover.
[Confirm the settings]
1) Turn the main power switch on.
2) Press the system menu key, then, System/Network.
3) The user authentication dialog is shown if user authentication is not enabled.
Enter the login user name and the login password, then, press Login.
Use an administrator privilege for login.
4) Confirm that the Confidential Guard is set to On.
Y116141-8
Screw
Screw
Figure 1-2-86
Copy guard PWB
Figure 1-2-87
1-2-61
DP junction PWB
DP junction PWB
YC35
FFC connector
Service Manual
2NP
Advertisement
