Advertisement
Item No.
U026
Pulling Backup Data
Description
Performs restoring of the backup data..
Purpose
Restores the setting values that was backed up in the flash memory from the HDD.
Method
1. Press the start key.
2. Press [Execute].
3. Press the start key.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
* : NG will be displayed when an error was resulted at completion.
Saved data:
U278 Setting the delivery date
U402 Adjusting margins of image printing
U952 Maintenance mode workflow
U030
Checking the operation of the motors
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Press the start key.
2. Select the motor to be operated.
3. Press the start key. The operation starts.
Feed
Exit(CW)
Exit(CCW)
Drum K
Drum COL
DLP K(CW)
DLP K(CCW)
DLP COL(CW)
DLP COL(CCW)
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Service Manual
Display
Conveying motor (CM) is turned on
Eject motor (EM) is turned on clockwise
Eject motor (EM) is turned on counterclockwise
Drum motor K (DRM-K) is turned on
Drum motor YCM (DRM-YCM) is turned on
DLP motor K (DEVM-K) is turned on clockwise
DLP motor K (DEVM-K) is turned on counterclockwise
DLP motor YCM (DEVM-YCM) is turned on clockwise
DLP motor YCM (DEVM-YCM) is turned on counterclockwise
Description
Description
1-3-34
2NP
Y116141-8
Advertisement
