Advertisement
Item No.
U241
Checking the operation of the switches of the finisher
Description
Displays the status of each switches and sensors of 1000-sheet finisher.
Purpose
To check the operation of each switches and sensors of the 1000-sheet finisher.
Method
1. Press the start key.
2. Select the item to be checked.
Finisher
Mail Box
Punch
Method: [Finisher]
1. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
Front Cover
Top Cover
Tray U-Limit
Tray Middle
Tray L-Limit
Tray Top
HP
Middle Tray Eject
Staple HP
Middle Tray
Width Front HP
Width Tail HP
Bundle Eject HP
Lead Paddle
Shift Tail HP
Shift Unlock HP
Sub Tray Full
Shift Set
Y116141-8
Display
Checking the switch and sensor of the document finisher
Checking the switch and sensor of the mailbox
Checking the switch and sensor of the punch unit
Display
DF front cover switch (DFFCSW)
DF top cover switch (DFTCSW)
DF tray sensor 1 (DFTS1)
DF tray sensor 3 (DFTS3)
DF tray sensor 4 (DFTS4)
DF tray upper surface sensor (DFTUSS)
DF paper entry sensor (DFPES)
DF middle eject sensor (DFMES)
DF slide sensor (DFSLS)
DF middle tray sensor (DFMTS)
DF side registration sensor 1 (DFSRS1)
DF side registration sensor 2 (DFSRS2)
DF bundle discharge sensor (DFBDS)
DF paddle sensor (DFPDS)
DF shift sensor 2 (DFSFS2)
DF shift release sensor (DFSFRS)
DF sub tray full sensor (DFSTFS)
DF shift set sensor (DFSFSS)
Description
Description
Description
1-3-105
2NP
Service Manual
Advertisement
