Advertisement
Item No.
U031
Checking switches and sensors for paper conveying
Description
Displays the on-off status of each paper detection switch or sensor on the paper path.
Purpose
To check if the switches and sensors for paper conveying operate correctly.
Method
1. Press the start key.
2. Turn each switch or sensor on and off manually to check the status.
When a switch or sensor is detected to be in the ON position, the display for that switch or
sensor will be "1".
Regist
Fuser
Duplex
Feed2
FeedDown Tray Full
Job Separator Full
Bridge Exit
Fuser Jam
Feed
Bridge1
Bridge2
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y116141-8
Display
Registration sensor (RS)
Fuser pre sensor (FUPS)
Duplex sensor (DUS)
Feed sensor 2 (FS2)
Paper full sensor (PFS)
JOB paper full sensor (JPFS)
Bridge eject sensor (BRES)
Eject sensor (ES)
Feed sensor (FS)
Bridge conveying sensor1 (BRCS1)
Bridge conveying sensor2 (BRCS2)
Description
Switches and sensors
1-3-35
2NP
Service Manual
Advertisement
